A bedspread is meant to do more than cover the mattress. The classic look is a single layer that runs over the pillows and falls past the sides of the bed, often far enough to hide the box spring or bed frame. That only works if the size is right. Too small and the sides stop short; too large and fabric pools on the floor.
This guide gives you the actual dimensions of the bedspreads and coverlets in our bedspread collection, shows how much drape each size gives on a standard mattress, and explains when it makes sense to size up.
Quick answer
- Queen bed: most of our queen bedspreads measure 96" x 108", which leaves about 18" of drop on each side of a standard 60" wide queen mattress. For a deeper drape, our oversized styles measure 102" x 120".
- King bed: most of our king bedspreads measure 102" x 113" (about 13" per side on a 76" king). Oversized king styles measure 120" x 120" (about 22" per side).
- Measure your bed height first. Measure from the top of the mattress to the floor. If that number is larger than the side drop, choose an oversized style or pair the bedspread with a bed skirt.
Standard mattress sizes
| Bed size | Mattress (width x length) |
|---|---|
| Twin | 38" x 75" |
| Full | 54" x 75" |
| Queen | 60" x 80" |
| King | 76" x 80" |
| California King | 72" x 84" |
If you are unsure what size your mattress is, our sheet size guide walks through it.
Our bedspread sizes, by style
Bedspread sizes are not standardized across the industry, and they are not identical across our own collection either. Our bedspreads fall into three size groups, plus coverlets.
Classic bedspreads
Most of our matelassé and jacquard bedspreads, including the Basketweave, Fleur de Lis, Paisley, Solitaire and Celtic Circle sets, use these sizes:
| Size | Bedspread | Drop per side | Pillow shams |
|---|---|---|---|
| Twin | 70" x 100" | about 16" | 1 sham, 20" x 26" |
| Full | 80" x 108" | about 13" | 2 shams, 20" x 26" |
| Queen | 96" x 108" | about 18" | 2 shams, 20" x 26" |
| King | 102" x 113" | about 13" | 2 shams, 20" x 36" |
Medium-weight bedspreads with a California king option
The Calvert, Hibiscus and Peploi sets come in full through California king:
| Size | Bedspread | Drop per side |
|---|---|---|
| Full | 80" x 108" | about 13" |
| Queen | 96" x 108" | about 18" |
| King | 102" x 113" | about 13" |
| California King | 113" x 117" | about 20" |
Oversized bedspreads
The Aspen, Remi, Victory and Florin sets are cut larger for a deeper drape:
| Size | Bedspread | Drop per side |
|---|---|---|
| Twin | 81" x 110" | about 21" |
| Full | 96" x 110" | about 21" |
| Queen | 102" x 120" | about 21" |
| King | 120" x 120" | about 22" |
Coverlets
A coverlet is shorter by design. It sits on top of the bed and ends a little below the mattress edge rather than reaching the floor. Our Tanta, Aswan and Vineyard coverlets measure:
| Size | Coverlet | Drop per side |
|---|---|---|
| Throw | 50" x 70" | for a sofa or the foot of the bed |
| Queen | 90" x 90" | about 15" |
| King | 108" x 90" | about 16" |
Not sure whether you want a bedspread or a coverlet? See bedspread vs. quilt vs. coverlet.
How to choose the right size in 3 steps
- Confirm your mattress size from the table above.
- Measure the drop you need. Measure from the top of your mattress to where you want the bedspread to end: the floor for a full drape, or just past the bed frame for a tailored look. Mattress toppers and pillow-top mattresses add height, so measure with them in place.
- Compare with the drop per side in the tables. If the classic size falls short, look at the oversized group, or add a bed skirt underneath.
The extra length on every bedspread (for example, 108" on a queen bed that is 80" long) is what lets it tuck under and fold over the pillows and still fall at the foot of the bed.
Allow for washing
Our bedspreads are made oversized to allow for 5% to 8% shrinkage of the natural fibers when washed. To keep shrinkage to a minimum, wash in cold water and dry on low heat. If your measurement is borderline, the larger size is the safer choice.
Frequently asked questions
What size bedspread do I need for a queen bed?
For a standard queen mattress (60" x 80"), our classic queen bedspreads measure 96" x 108", giving about 18" of drop on each side. If your bed is taller than that from mattress top to floor, choose an oversized queen at 102" x 120".
Can I use a king bedspread on a queen bed?
Yes, if you want more drape. A 102" x 113" king bedspread on a 60" queen mattress gives about 21" per side. Check that it will not pool on the floor if your bed is low.
What size bedspread fits a California king?
Our California king bedspreads measure 113" x 117", which gives about 20" of drop on each side of a 72" x 84" mattress.
Is a coverlet smaller than a bedspread?
Usually, yes. Our queen coverlets measure 90" x 90", compared with 96" x 108" for a classic queen bedspread, so they end just below the mattress instead of reaching the floor.
Do bedspreads come with pillow shams?
Most of our bedspread sets include two pillow shams; twin sets include one. Coverlet throws do not include shams.
Ready to choose? Browse the full bedspread and coverlet collection, with free shipping across the US. For warmer or cooler months, see how to choose a bedspread weight for every season.
Leave a comment